Note: This page has moved to https://eblocker.org/en/docs/technical-specifications-and-safety-notes

Deutsch | English

eBlocker Help > Knowledge Base > First steps

Technical specifications and safety notes

(not valid for software licenses)

• 1 x 10/100/1000 LAN RJ45
• 1 x Power supply 5V (≥ 2A)
• 1 x Wi-Fi 802.11 b/g/n
• 2 x USB 2.0 (for extensions)
• 1 x HDMI (not in use)
• Power consumption: <10W
• Dimensions: 9x9x9cm
• Weight: ca. 153g

Safety notes

Please mind the following safety notes before using your eBlocker.

• Your eBlocker does not have a power switch. A disconnection from the power supply should be possible at any time. To do this, shut down the eBlocker in the Settings > menu SYSTEM > tab REBOOT by clicking on the button "Shutdown".
• In case of wall mounting your eBlocker, please ensure that no wires or piping can be damaged behind the mounting surface.
• Please protect your eBlocker from moisture, dust, liquids and vapors.
• Please do not block the air vents of your eBlocker.
• Never disconnect the power supply or network connection during an update. This can damage the eBlocker irreparably.